Descripción
!!! Please note that replacing the PCB also requires soldering tools and experience, as you will need to remove the main chip or ROM chip (depending on the board) off your original damaged board and solder it onto the replacement board. You will not be able to repair your drive just by switching boards !!!
Please Note:
1.These boards are used, the circuit board components not falling, the interface did not break.
2. All PCB have been tested before shipping. If the PCB is faulty during shipping, please inform us immediately after your received it.
Remarks: If your HDD firmware, date code and site code is different. You can swap the BIOS chip from original PCB to the replacement PCB, to make the replacement PCB compatible with your HDD.
If you need our help to swap the BIOS chip on the PCB, please contact us. Thank you.
Attention: Replacement the PCB only can solve the problem that is caused by the PCB faulty. If your HDD having the following problem.
Symptoms of failure:
The drive will power up normally (no ticking noises, errors etc) but will not be recognized by the computer
The drive will power up normally and be recognized correctly but will report a size of 0 bytes
The drive will power up but report SMART errors on boot
Replacement the PCB may not solve the above problem. These problem is caused by the HDD firmware corrupted.
Return& Refund&Change Dtails:
1. Excellent tested with 90 days warranty.
3. Accept refund if motherboard problems from seller,but buyer stand the shipping cost.
4. Unreasonable requirement for refunding & buyer purchased the wrong model. Only refund 80% of the purchasing order. If the motherboard was damaged .We refuse the refund and also we are please to communicate with the buyer for the solutions.
5. Returning item should be provided tracking number and better to be received within Warranty.
Therefore, your feedback is extremely important to us !3:If you are satisfied with our items and service ,please leave us good feedback ,thank you in advance !
