DC 12V Copy Remote Controller Universal 433.92 MHz Auto Cloning Duplicator Wireless Auto Code Matching for Garage Rolling Door
Feature:
1. RF Transmitter: This copy remote control uses a high-performance RF chip, crystal oscillator frequency stabilization, and accurate frequency. Multi-functional, multi-variable, personalized, humanized and simple design, quick to use.
2. Features: The copy remote control has an independent battery compartment cover, which is convenient and quick to replace the battery. Long transmission distance, no directionality, high transmission sensitivity, no signal blocking.
3. Function: Copy remote control can copy most fixed codes and learning codes wireless remote control, the copying speed is fast and the operation is simple. After copying, the original remote control will not be affected.
4. No Coding Required: Copy the code automatically and use it directly without coding.
5. Application: This smart copy remote control is suitable for battery cars,
retractable doors, garage doors, barrier gate access control, and auto
parts modification.
Specification:
Wireless Communication: RF
Model Number: Copy Remote Control
Product Name: Copy Remote Control
Model: AK-432NA
Operating frequency: 433.92MHz
Modulation method: ASK
Transmission power: 3-6dBm
Emission current: ≤21mA
Quiescent current: 0.15uA
Working voltage: DC12V
Material: ABS
Product size: About 68x33x11mm/2.67x1.3x0.43in
Product weight: 18g
Function Description:
1. Copy code operation
If the remote control has been paired, it needs to be cleared before pairing. Code pairing operation: Press and hold the copied remote control and the single button of the copy remote control at the same time until the indicator light of the copy remote control changes from flashing to constant light, then release the two remote control buttons, and the code pairing is successful. Other buttons are also operated in this way in turn until all buttons are copied.
2. Code clearing operation
Press and hold the unlock and lock buttons of the copy remote control at the same time until the indicator light flashes quickly, then short press the unlock button three times to clear the code (keep pressing the lock button during this process).
3. Recovery code operation
Press and hold the mute and ring buttons of the copy remote control at the same time until the indicator light flashes quickly, then the remote control code that was cleared before can be restored.
Copy chip:
PT2242, PT2260, PT2262, EV1527, 527, PT2240, SMC918, HT-12E, AX5326-3, AX5326-4, AX5026, HT600, HT680, HT6207, HT6010, HT6014, MC145026, HT640, etc.
Precautions:
1. The battery voltage cannot exceed the working voltage range.
2. When copying the remote control, try to keep the two remote controls close to each other, otherwise there will be abnormal copying.
3. In an environment with strong wireless interference, the remote control distance may be reduced.
4. Keep out of reach of children.
5. It is forbidden to use it in a humid environment, otherwise it may cause damage to the remote control.
Note:
Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!
Please allow 1-2cm measuring deviation due to manual measurement.
1 x Copy Remote Control
|