Color
RGB
Color de hoja
Descripción
JY-6S6PIN RGB Fan Specification:
Dimensions: 120x120x25mm
Net Weight: 161g
Fan Speed: 600-1600 (±10%) RPM
Noise: 6-30±10%DBA
Air Volume: 67±10%CFM
Bearing: Hydro Bearing
Current: 0.25±10%Amp
Voltage: 12VLife Span: 50000Hrs
Power supply interface: 6pin
Note 1:
The single fan has a 6-pin interface and needs to be used with a controller. It cannot be directly connected to the motherboard.
Note 2:
In order to avoid customs inspection on live products, we have removed the battery (button battery), please know!
16 million Colors RGB Lights
6Pin connector provides safe and reliable power output for RGB LED fans and brings multiple lighting modes through the controller.
Cool and Efficient
The 9 fan blades are designed with thread, reaching 67CFM output air volume at 1800 RPM
Hydraulic Bearings For Quieter Heat Dissipation
Oily Hydraulic Bearings to Reduce Bearing Friction Noise Service life 50000 Hours (MTBF)
Low Noise Runing for Quiet Office/Game
4 sound-absorbing pads around the fan reduce vibration and noise efficiently, 6-30 ± 10% DBA noise is negligible
Comes with a RGB 6-pin connector
Only works with the controller; cannot connect directly to the motherboard.
About the Controller
1. If the remote is lost, connect the restart button of the main unit to this port to change the lighting.
2. In the event of a power outage, insert the large 4-pin power cable into the red power input port on the left side of the controller. Plugging the power cable into the wrong port may cause a short circuit and damage the equipment.
3. If the motherboard does not have a 5V 3-pin ARGB port, do not connect the motherboard sync cable. You can directly use the remote control to adjust it
4. Note: Do not plug the power cable into the wrong port; doing so will damage the equipment.
Power Supply Via 4PIN Power Port
The fan is powered via the controller's 6-pin port, and the controller via the motherboard's 4-pin port.
Product Display
Opiniones de clientes
5 opinionesVálvulas geniales. Una de las desventajas es que el controlador no es de Jeyi y no tiene conectores RGB de 3 pines. Pero por su precio, es una excelente opción.
los skewers son buenos.
mariposas normales. ¡Para tu dinero eso es lo mismo!
