14,33 € 16,28 €
USB to RJ45 8P8C Control Cable for Nexremote Telescope
USB to RS232 Serial Cable , 6FT; PL2303GT driver::https://www.prolific.com.tw/US/CustomerLogin.aspx
PL2303GTChip RS232 USB Console Cable for Replace Hand Control . PC Connect the Device Directly
USB RJ45 for Celestron Telescope Replace Hand Control
Support All Windows, Vista, LInux etc (not support Android),
PC Port Cable for Celestron Scopes
A cable can be connected from the serial port of a computer to the PC Port on the base of the GPS, CPC and CGE telescopes.
The
same cable can be used for AS-GT, CGEM, for NexStar 5i/8i, for NexStar
SE and for NexStar SLT with an optional Auxiliary Port Accessory Kit.
The
two uses of this connection would be to run for NexRemote without the
use of the real hand control and to update the motor control firmware in
the mount.
See Firmware Versions on this web site or the Support
section for Celestron's web site to see if newer firmware is available
for your scope.
The PC port on the base of the scope is a standard RJ-45.
The following is the end of the cable that plugs into the PC port on the scope.
Insure that the leads indicated connect to the correct pins on the DB-9 serial port connector shown below.
Package : 1 x USB to RJ45 RS232 Serial Cable (NO CD).
FTDI driver, please go to PL2303GT website to download it. https://www.prolific.com.tw/US/CustomerLogin.aspx
The PL2303GT is a low cost and high performance USB-to-RS232 Bridge Controller with built-in RS232 transceiver. The PL2303GT provides a convenient solution for connecting an RS-232 full-duplex asynchronous serial device to any Universal Serial Bus (USB) capable host. The PL2303GT highly compatible drivers could simulate the traditional COM port on most operating systems allowing the existing applications based on COM port to easily migrate and be made USB ready.
The PL2303GT integrates a high baud rate RS-232 transceiver that meets the EIA/TIA-232F and CCITT V.28 communications interface specifications. The RS-232 transceiver is a 3-transmitters and 5-receivers device with a high-efficient charge pump circuit embedded. It provides the bipolar output to the transmitters, and makes the transmitters to deliver the RS-232 output voltage levels. Under normal operation, PL2303GT operates at very low power consumption with guaranteed data rate up to 1Mbps.
Full Compliant with USB Specification v2.0 (Full-Speed)
On-chip USB 1.1 transceiver and 5V to 3.3V regulator
On-chip 96MHz Clock Generator
Follow EIA/TIA-232F standards
Full UART RS232 interface pins (TXD, RXD, RTS, CTS, DTR, DSR, DCD, and RI)
Flexible baud rate support up to 1Mbps
Three RS232 Drivers design
Five RS232 Receivers (always active)
Hardware and software flow control
On-chip OTP (One Time Programmable) ROM for writing startup device configurations
Each IC has unique ID(for Serial Number)
1024-byte bi-directional data buffers (768-byte receive/256-byte transmit)
Buyer Notice
>> Shipping & Handling
1. Processing Time: 1-3 days for all orders.
2. Special Requests: Please list your special requests (color, package, etc) in the Notes Section when check out.
3. Shipping Way: Most orders(less than 2KG) are shipped by Aliexpress standard shipping / Netherland Post / Swiss Post
Under $5 orders are shipped by Seller Method Shipping.
Any other requirements about the shipping way, please contact us.
4. Delivery Time: Normally 15-60 days to get the order, except Brazil.Sometime the transit time may be long and vary,particularly during the holiday season.
Please contact us if you need help for the tracking.
5. Import Duties: Import duties, taxes and charges are not included in the item price or shipping charges.
>> Return & Refund
Return Policy: We accept Aliexpress return policy; Buyer pays return shipping.
Refund Policy: We provide reliable service policy.
bull If you receive the goods broken. Contact us for Full money refund or replacement.
bull If you don't receive the goods in stated delivery time. Contact us for Full money refund or replacement.
bull If you receive the goods with quality problem, contact us for half or full amount refund.
bull Any disatified with the product, please contact us first instead to open dispute or leave negative feedback.
>> Feedback
If you are satisfied with the item while it is in good condition, we sincerely to invite you to leave us all 5-star rating positive feedback.
If you are disatisfied with the item or service, please contact us first, we will supply the best solution and work harder to give you more excellent service.
Comprar Cable profesional PL2303GT USB a RJ45, conector Serial RS232 Nexremote, reemplazo de Celestron HC al dispositivo telescópico p/n 93965