CA-PS700 Cable adaptador USB-C PD para Canon LP-E8 DR-E8 LP-E10 LP-E12 DR-E12 DR-E15LP-E17 DR-E17 LP-E5 NB-10L NB-2L batería simulada

CA-PS700 USB-C PD Adapter Cable For Canon LP-E8 DR-E8 LP-E10 LP-E12 DR-E12 DR-E15LP-E17 DR-E17 LP-E5 NB-10L NB-2L Dummy Battery

Output:8V

(10) To connect with DR-80 DC Coupler (NB-10L Dummy Battery), so fits for following Canon digital cameras:
For Canon Powershot SX40 HS
For Canon SX40
For Canon SX40 HS SX40HS
For Canon Powershot SX50 HS
For Canon SX50
For Canon SX50 HS SX50HS
For Canon Powershot SX60 HS
For Canon SX60
For Canon SX60 HS SX60HS
For Canon Powershot G1 X
For Canon G1
For Canon G1 X G1X
For Canon Powershot G15
For Canon G15 G15
For Canon Powershot G16
For Canon G16 G16

(11)To connect with DR-700 DC coupler (NB-2L Dummy Battery), so fits for following Canon digital cameras:
For Canon Powershot S40
For Canon Powershot S45
For Canon Powershot S50
For Canon Powershot S55
For Canon Powershot S60
For Canon Powershot S70
For Canon Powershot S80
For Canon EOS-350D EOS 350D
For Canon EOS-400D EOS 400D
Digital Rebel XT
Digital Rebel XTi
and more models.

important!

Please note that with some cameras, closing the camera battery door is a necessary step to use the DC adapter kit. Please refer to our operation manual for the installation example of the dummy battery.

Advantage:

1. The Camera PD-BX Convertor can't only play the role of power adapter,It is different from most products on the market,The convertor With power status indicator and integrates 2 chips, one is used to identify PD and QC3.0/4.0 power, The other is used for 9V-24V wide voltage input, After the step-down treatment, the regulated output can effectively prevent high voltage, prevent high current, and prevent short-circuit, so it has multi-protection functions. If the dummy battery is connected, there are three important chips.

2. High-quality chips,DC-DC converter,high conversion efficiency,Good stability,quiescent current is small,while also serving to effectively suppress harmonic current noise.Using a wide range,suitable for most 7.2V-8.4V and 9V camera.

3. Compared with the ordinary USB Type-A (USB-A) power supply, the USB Type-C (USB-C) input PD power mode will get more power. Don't worry about the power bank will disconnect the power supply when the camera sleeps Output. If you use a Ordinary USB-A power supply,The camera will not be able to shoot at any time, when the camera is in smart sleep mode or standby mode, the Power bank usually disconnects the power output after one minute, which will miss the snapshot.

4. Replace the camera battery handle grip or carry more batteries,camera insert battery grip will too heavy,is not conducive to taking pictures.

After connecting to the correct PD and QC3.0/4.0 power adapter or power bank, the red indicator light will always be on when the power is on. Certain models of cameras may consume higher current, so please use a high-performance power supply.

VERY IMPORTANT:

The power of the mobile phone PD charger must be between 18W -65W, The camera can start normally. Only support 18W 30W 45W 60W 65W PD Wall charger / PD mobile power supply / PD Car charger to power the camera, please do not use other devices, otherwise the camera will be damaged. This device is only used to power the camera, Do not connect other devices at the same time, Otherwise, it will cause insufficient power supply.