loading gallery...
Piezas de impresora 3D, placa de superficie de construcción magnética Flexible, almohadillas para Ender-3/Ender-3 Pro/Ender-5, cinta de cama de impresión
9,07 €
15,12 €
Enlace proporcionado por:
Enviado desde:
Color:
|
Feature: 5 major advantages: more high temperature resistance, no warping, repeated use, convenient cleaning, easy installation, convenient and fast. The black frosted surface with coarse sand pattern on the surface has strong flexibility and high temperature resistance, easy to stick to the printed product, and easy to take out and separate. PC mounted soft magnet material, flame-retardant, wear-resistant, anti-oxidation, low molding shrinkage, long-term resistance to 70℃ high temperature without demagnetization, hot-melt material combined with the printing layer, good reduction of deformation caused by shrinkage, scratch resistance, dirt resistance, resistance Hand sweat, can be used repeatedly. Easy-to-remove 3D printing platform suitable for PLA and PLA-based materials. To use it, simply glue the bottom plate to your build plate and start printing, peel off the top plate with the finished print, and then peel the top plate from the print. Snap the top plate back to its original position for the next round of printing. Specification: Name: Soft Magnetic Sticker for Heating Bed Applicable models: For Ender-3 series/CR20 and other FDM 3D printers Colour: Black Material: PC mounted soft magnet material Product size: 220*220*1mm/235*235*1mm (optional) Net weight: 220g Product Description: The product is divided into two parts: A (top) + B (bottom). Just stick the bottom plate to your build plate to start printing, peel up the top plate with the finished print, and then peel off the top plate from the print. Return the top plate to its original position for the next round of printing. If it fails to adsorb, please rotate it 90 degrees and try again. This build surface is only suitable for PLA filaments and PLA-based materials, and is not suitable for high-temperature printing applications above 70°C. Note: Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you! Please allow 1-2mm measuring deviation due to manual measurement.              
|
Comprar Piezas de impresora 3D, placa de superficie de construcción magnética Flexible, almohadillas para Ender-3/Ender-3 Pro/Ender-5, cinta de cama de impresión
