loading gallery...
Barra Anticolisión de aleación de aluminio para cámara de cardán DJI Avata Combo Drone Gimbal Bumper PTZ Lens Protection Upgrade Bumper
14,48 €
23,35 €
Enlace proporcionado por:
Enviado desde:
Color:
|
Feature: 1. Anti-collision: The protection bars are made of high quality aluminum alloy, which are hard and wear-resistant and can effectively prevent the damage caused by the impact of the crossing machine. Through electroplating and oxidation treatment, the anti-collision protection bar can be endowed with cool appearance, good corrosion resistance, wear resistance and insulation. 2. Arc-shaped Frame: The shape of the anti-collision bar adopts an arc-shaped design, which can complement the hollow shape of the front of the aircraft, and can provide a certain rolling trajectory when starting the anti-turtle, improving the success rate of the anti-turtle. 3. Screw Fixation: Adopt precise cutting for the frame of the machine body, the crash bar can clamp the upper frame, and the screw fixation can improve the stability, and it can be firmly fixed without loosening. 4. Buffer Impact: 1.7CM higher than the gimbal, can resist a variety of sudden impact objects, protect the precious gimbal camera from damage. 5. Not Obstruct the Flight Field of View: The anti-collision bar adopts the design of outward expansion, and the distance from the gimbal camera is about 2.8CM wide, which will not cause too much interference to the flight screen, and enjoy the flight experience. Specification: Product name: anti-collision protection bar Product material: aluminum alloy Product size: about 64 * 51 * 24mm/2.52 * 2.01 * 0.94inch Net weight of product: about 12.8g Package size: about 90x51x18mm/3.54x2.01x0.71inch Package weight (product+package): about 18.3g Applicable model: for DJI AVATA Installation steps: 1. Use the original hexagonal screwdriver to remove the two screws of the original upper frame 2. Align one side of the arc shaped outer frame of the anti-collision bar with the front screw hole and the other side of the screw hole of the upper frame of the UAV 3. Put in the screw, and use a screwdriver to tighten it on the other side 4. Installation completed
Note: 2 * Screws 1 * Screwdriver                     
|
Comprar Barra Anticolisión de aleación de aluminio para cámara de cardán DJI Avata Combo Drone Gimbal Bumper PTZ Lens Protection Upgrade Bumper
