ADT-Link PCI Express 4.0 x4 To x1 Extension Cable
Brand name: ADT-LINK
Product name: PCIe 4.0 x4 to x1 extension cable
Product model:
R12SL-TL 4.0Dual 90 Degree
R12SF 4.0 180 Degree straight
R12SL 4.0 90 Degree
Transfer speed: PCIe 4.0 x1 full speed
Cable length: 5 ~ 100cm, the length can be customized
Application: wireless network card, wired network card, capture card, USB card, solid state drive card, as long as the PCIe card is x4 and the motherboard slot is x1 interface can support.
Cable length Description:
The length of the wire refers to the part of the visible wire. It does not include the PCB and the connector's Length. For the wire length. If it contains the PCB and the connector's Lengths, add about 2cm. The total length is about 7cm, please refer to the 5cm dimension in the figure below.
Q&A:
1)What is the quality of the wire? Is there a shield?
There is metal shielding, advanced EMI shielding conductive polymer, new materials for EMI shielding, flat cable design. This technology allows each cable to be completely covered by the electromagnetic interference shielding of conductive polymer to prevent the incidence or emission of electromagnetic frequencies, minimize interference and performance degradation, and reduce the weight of the cable
2) Is the wire soft? Can it be bent?The cable is the fourth-generation PCIe dedicated cable developed and designed by ADT. The black cable has a thickness of 1.3mm, the silver cable has a thickness of 1.4mm, and the blue cable has a thickness of 0.85mm. The cable can be bent or folded without affecting the use.
3)Why is the performance poor after connecting the extension cord? Or is it stuck slowly or not working?When the graphics card extension cable is connected, the performance is insufficient or the function is abnormal. There are three common problems:1. The extension cable is assembled incorrectly. The graphics card extension cable should be installed in the graphics card slot closest to the CPU. Other slots have poor performance.2. The golden fingers of the graphics card or the motherboard socket terminals are not in good contact or have oxides, causing the card to slow down, and the golden finger contact points should be clean.3. The motherboard is aging, the graphics card is aging, and the equipment is more than 4 years old and does not support the use of extension cords. Please use at a lower speed if the equipment is aging or the signal is poor
4)Product advantages:
1. Wire advantage, the fourth-generation anti-interference low-resistance wire developed and designed by ADT is scratch-resistant and wear-resistant, and high-frequency supports PCIe 4.0 stable transmission2. Line length advantage, from 5cm to 100cm can be customized3. Differential signal has no via hole design, there is no signal attenuation interference problem of parasitic capacitance and parasitic inductance, and there is no CAF micro short circuit phenomenon, and the product is durable4. The product is made of high-quality materials and the PCB is made of precision. The PCB uses high TG plates. The thickness of the copper material is thickened to 1oz. The gold fingers have sufficient gold plating content and the gold plating feet have good electrical conductivity, which can reduce the blue screen of crash caused by increased oxidation and rust resistance.5. The wire used in the product is very durable. Use PCB gaskets with a thickness of 3mm to protect the metal welding points, and lock the screws and hexagonal nuts to fasten the product. The product is strong and reliable, resistant to pulling, anti-interference, and will not break the wire. The nail drop problem. The wire can be bent or folded without affecting the use.
