Raspberry Pi Pico 2 RP2350-Una miniplaca tipo A RP2350A

Castellated Module, Suitable For SMD Applications

• RP2350A microcontroller chip designed by Raspberry Pi in the United Kingdom

• Adopts unique dual-core and dual-architecture design: dual-core Arm Cortex-M33 processor and dual-core Hazard 3 RISC-V processor, flexible clock running up to 150 MHz

• 520KB of SRAM, and 4MB of on-board Flash memory

• Type-A connector, keeps it up to date, easier to use

• Castellated module allows soldering directly to carrier boards

• USB 1.1 with device and host support

• Low-power sleep and dormant modes

• Drag-and-drop programming using mass storage over USB

• 29 × multi-function GPIO pins (20× via edge pinout, others via solder points)

• 2 × SPI, 2 × I2C, 2 × UART, 4 × 12-bit ADC, 16 × controllable PWM channels

• Accurate clock and timer on-chip

• Temperature sensor

• Accelerated floating-point libraries on-chip

• 12 × Programmable I/O (PIO) state machines for custom peripheral support

On-board Type-A male port

Plug and play, no need for additional cables

C/C++，MicroPython

Complete SDK and open source tutorials are provided to make it easy to get started and can be quickly embedded into applications

Dual-core, dual-architecture processor

Onboard dual-core ARM Cortex-M33 + dual-core Hazard3 RISC-V processors

Running at up to 150 MHz

29 multi-function GPIO pins

Supports configuration pin function, which can be easily and flexibly developed and integrated

Resource Overview

1. PCB Type-A

2. RT9013-33GB

   500mA low dropout, low noise, ultra-fast LDO

3. WS2812

   RGB LED

4. BOOT

5. W25Q32JVSSIQ

   4MB NOR-Flash

1. RESET

2. RP2350A

   Dual-core, dual-architecture processor, up to 150MHz operating frequency

3. RP2350A Pin extraction

   Lead out 10 pins (to be soldered), 9 of which are GPIO pins.

4. Debug

Product size

[] RP2350-One