0,99 € 7,62 €

Raspberry Pi pantalla de tinta electrónica de 2,13 pulgadas HAT 250x122 interfaz SPI para Arduino para Raspberry Pi / Jetson Nano

(Votos: 12) 147 unidades vendidas

Color:

Comprar

Descripción

Do not include Raspberry Pi


Overview

This is an E-Ink display HAT for Raspberry Pi, 2.13inch, 250x122 resolution, with embedded controller, communicating via SPI interface, supports partial refresh.

Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.

Features

  • No backlight, keeps displaying last content for a long time even when power down

  • Ultra low power consumption, basically power is only required for refreshing

  • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano

  • SPI interface, for connecting with other controller boards like Arduino/Nucleo, etc.

  • Onboard voltage translator, compatible with 3.3V/5V MCUs

  • Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)

Advantages Of EINK
Standard Raspberry Pi 40PIN GPIO Header

Compatible With Raspberry Pi Series Boards, Jetson Nano

for reference only, the Raspberry Pi in the picture is NOT included
Onboard SPI Control Interface

For Use With Other Controller Boards Like STM32/Arduino

VCC

3.3V/5V

GND

Ground

DIN

SPI MOSI pin

CLK

SPI SCK pin

CS

SPI chip selection, low active

DC

Data / Command selection (high for data, low for command)

RST

External reset, low active

BUSY

Busy status output (high for busy)

Onboard Voltage Translator

Compatible With 3.3V / 5V MCUs

Application Examples

Suitable For Price Tags, Asset/Equipment Tags, Shelf Labels, Conference Name Tags...


Package Contains
2.13inch e-Paper Option （Without PCB）
Note: This is a raw display, you may also want to buy the assembled variant for easy testing and comparing: 2.13inch e-Paper HAT

  1. 2.13inch e-Paper Option x1

2.13inch e-Paper HAT（With PCB） Option

  1. 2.13inch e-Paper HAT Option x1

  2. RPi screws pack (2pcs) x1

  3. PH2.0 20cm 8Pin x1

Con la garantía de:

Opiniones (12)

Opiniones de clientes que compraron este producto

a***r CA
11/22/2025
4/5
Variante: Color:2.13inch-e-Paper-HAT
Anónimo DE
11/19/2025
5/5

Perfecto y bien empaquetado al llegar

Variante: Color:2.13inch-e-Paper-HAT
Anónimo DE
11/15/2025
5/5

Aún no probado... ¡pero estaba muy bien empaquetado! ! ! Ahora solo estamos esperando el Rpi XD!!. !

Variante: Color:2.13inch-e-Paper-HAT
d***r US
11/10/2025
5/5
Variante: Color:2.13inch-e-Paper-HAT
M***i DE
10/23/2025
5/5
Variante: Color:2.13-e-Paper-HAT-(G)
W***r UK
10/12/2025
5/5

Siempre es útil tener algunas pantallas de repuesto por si acaso, aunque aún no las he usado ni probado.

Variante: Color:2.13inch-e-Paper
D***v DE
10/9/2025
5/5
Variante: Color:2.13-e-Paper-HAT-(G)
s***r JP
9/26/2025
5/5
Variante: Color:2.13-e-Paper-HAT-(G)
Anónimo BR
9/25/2025
5/5
Variante: Color:2.13inch-e-Paper-HAT
Anónimo RU
8/23/2025
5/5
Variante: Color:2.13inch-e-Paper-HAT
Anónimo KR
7/9/2025
5/5
Variante: Color:2.13-e-Paper-HAT-(G)
Anónimo OM
6/1/2025
5/5
Variante: Color:2.13inch-e-Paper-HAT

0,99 € 7,62 €

Comprar

Productos relacionados