11,58 € ~~27,63 €~~

Placa Base Raspberry Pi CM4 Nano (B)USB CSI DSI Mini HDMI Compatible con Gigabit Ethernet RJ45 del mismo tamaño que el CM4 para Raspberry Pi

(Votos: 1) 9 unidades vendidas

Enviado desde:

CHINA

Bundle (Pack):

Descripción

Nano Base Board (B) For Raspberry Pi Compute Module 4, Same Size As The CM4

Nano Base Board (B) For CM4

Suitable For Evaluating The Raspberry Pi CM4 Or Being Integrated Into End Products

Base Board for Compute Module 4 Lite/eMMC

Compact, Yet Complete

Standard CM4 Socket, 40PIN GPIO, Gigabit Ethernet, USB2.0, DSI, CSI, 3.5mm Audio Jack...
All In The Compact Body Just As The Size Of CM4

Note: the CM4 is NOT included. Please buy it separately if necessary.

Specifications

CM4 SOCKET

suitable for all variants of Compute Module 4

NETWORKING

Gigabit Ethernet RJ45 connector

CONNECTOR

Raspberry Pi 40PIN GPIO header × 1

USB

USB 2.0 Type A connector × 1

DISPLAY

MIPI DSI port × 1 (15pin 1.0mm FPC connector)

CAMERA

MIPI CSI-2 port × 1 (15pin 1.0mm FPC connector)

VIDEO

Mini HDMI port × 1, supports 4K 30fps output

AUDIO

3.5mm jack

STORAGE

Micro SD card socket for Compute Module 4 Lite (without eMMC) variants

POWER INPUT

5V

DIMENSIONS

56 × 41mm

What's On Board

CM4 socket
suitable for all variants of Compute Module 4
Micro SD card slot
for connecting a Micro SD card with pre-burnt image (Lite variant ONLY)
40PIN GPIO header
for connecting sorts of HATs
Gigabit Ethernet RJ45 connector
Power supply / Programming
5V power supply, or used for eMMC burning
3.5mm audio jack
User button
USB2.0 connector
for connecting sorts of USB devices

CSI connector
MIPI CSI camera interface
DSI connector
MIPI DSI display interface
MP1658
Mini HDMI connector
supports 4K 30fps output
BOOT switch
ON: Switch USB to Type C interface, will enter download mode when powered on (configured as a large-capacity disk through RPI boot)
OFF: Switch USB to Type A interface, will not enter download mode when powered on (booted from eMMC or Micro SD card)

* Resources for different product may vary, please check the wiki page to confirm the actually provided resources.

PACKAGE CONTENT1.CM4-NANO-B x12.2*20PIN color-coded straight pinheader x1

Nano Base Board (A) For Raspberry Pi Compute Module 4, Same Size As The CM4

Nano Base Board (A) For CM4

Suitable For Evaluating The Raspberry Pi CM4 Or Being Integrated Into End Products

Base Board for Compute Module 4 Lite/eMMC

Same Size As The CM4

Standard CM4 Socket, With Multiple Peripheral Interfaces, Suitable For Narrow Application Environment

Note: the CM4 is NOT included. Please buy it separately if necessary.

Specifications

CM4 SOCKET

suitable for all variants of Compute Module 4

CONNECTOR

Raspberry Pi 40PIN GPIO interface × 1

USB

USB 2.0 Type A interface × 1

CAMERA

MIPI CSI-2 port × 1 (15pin 1.0mm FPC connector)

STORAGE

Micro SD card socket for Compute Module 4 Lite (without eMMC) variants

POWER INPUT

5V

DIMENSIONS

55 × 40mm

What's On Board

CM4 socket
suitable for all variants of Compute Module 4
Power supply / Programming
5V power supply, or used for eMMC burning
Micro SD card slot
for connecting a Micro SD card with pre-burnt image (Lite variant ONLY)
CSI interface
1 × MIPI CSI camera interface
USB2.0 interface
for connecting sorts of USB devices

40PIN GPIO interface
suitable for connecting to various HAT modules
PWR indicator
CM4 power status
ACT indicator
CM4 working status
AMS1117-3.3
BOOT switch
ON: Switch USB to Type C interface, will enter download mode when powered on (configured as a large-capacity disk through RPI boot)
OFF: Switch USB to Type A interface, will not enter download mode when powered on (booted from eMMC or Micro SD card)

PACKAGE CONTENT

CM4-NANO-A x1
2*20PIN color-coded straight pinheader x1

12

Nano Base Board (C) For Raspberry Pi Compute Module 4, Same Size As The CM4, Onboard 8MP Camera

Nano Base Board (C) For CM4

Suitable For Evaluating The Raspberry Pi CM4 Or Being Integrated Into End Products

Base Board for Compute Module 4 Lite/eMMC

Multiple Interfaces, Onboard 8MP Camera

Same Size As The CM4, Standard CM4 Socket, With Multiple Peripheral Interfaces
Onboard 8MP Camera Module With 160°FOV To Meet Your Needs In The Application

for reference only, the CM4 is NOT included.

Specifications

CM4 SOCKET

suitable for all variants of Compute Module 4

CONNECTOR

Raspberry Pi 40PIN GPIO header × 1

USB

USB 2.0 Type A port × 1

DISPLAY

MIPI DSI port × 1 (15pin 1.0mm FPC connector)

CAMERA

IMX219-D160 (8MP, 160°FOV)

VIDEO

Mini HDMI port × 1, supports 4K 30fps output

STORAGE

TF card socket for Compute Module 4 Lite (without eMMC) variants

POWER INPUT

5V

DIMENSIONS

55.0 × 40.0mm

Application Example

for reference only, please refer to the part list for detailed package content.

What's On Board

CM4 socket
suitable for all variants of Compute Module 4
Mini HDMI port
supports 4K 30fps output
DSI port
MIPI DSI display interface
USB2.0 port
for connecting sorts of USB devices
TF card slot
for connecting a TF card with pre-burnt image (Lite variant ONLY)
Power supply / Programming
5V power supply, or used for eMMC burning
40PIN GPIO header
for connecting sorts of HATs

IMX219-D160 Camera
8MP, 160° FOV
User button
Connect to GPIO21
BOOT switch
ON: Switch USB to Type C interface, will enter download mode when powered on (configured as a large-capacity disk through RPI boot)
OFF: Switch USB to Type A interface, will not enter download mode when powered on (booted from eMMC or TF card)
ACK Indicator
CM4 working status
PWR Indicator
CM4 power status

PACKAGE CONTENT

Weight:0.002 kg

CM4-NANO-C x1
IMX219-D160 x1
2*20PIN color-coded straight pinheader x1

2

3

Con la garantía de:

Opiniones (1)

Opiniones de clientes que compraron este producto

d***r DE

7/30/2025

5/5

Variante: Bundle:Nano Base Board B Ships From:CHINA

11,58 € ~~27,63 €~~

Productos relacionados