Description
|
Feature: 1. PCI-E 4.0 graphics card is installed vertically. PCle4.0 wire, 220mm long, 90 degree vertical adapter cable, supports the installation of PCI-E interface of mainboard version 4.0/5.0, without debugging, ready to use; It supports downward compatibility, supports the installation of all brands of video cards below 3 slots, and supports the vertical installation of PCle4.0 video cards in all directions. It is recommended to use it with a G500A pure white chassis (this product does not include a chassis/motherboard). 2. High stability PCI-E slot. The PC+ABS material is used to protect the armor with high strength, ensure the clamping force of the video card, and prevent the video card from blue screen and other problems. Four layers of M6 low loss plates are used in the gold deposition process to enhance the plug life of the product and ensure good product performance. 3. Support 7+slot chassis expansion vertical video cards. Support the installation of ATX chassis with 7 PCI slots, and use the bracket for installation. The graphics card has a larger space from the glass, and the cooling air duct is better. (It is necessary to remove the whole PCI bar of the graphics card. The bracket installation is farther from the glass than the general vertical installation, and the cooling air duct is better). The case of small and medium-sized tower can also be installed with 4090 thick video card through hard mounting video card to solve the problem that the 4090 video card is too wide to be installed. (4090 video card: length: 280-367mm/11.02-14.48in, width: 140-166mm/5.51-6.54in, thickness: 71-78mm/2.8-3.07in). 4. Strengthen the connection. Protect the enhanced protection design with PHANTEKS logo printed on both sides, enhance the durability of the connection to the motherboard, and avoid the decline of the transmission rate. The cable is designed with EMI protection, which has no impact on the transmission rate. The double-layer, flat and foldable design is adopted, which has the advantages of light weight, good flexibility, strong resilience, etc., and is convenient for cable management. 5. Protect the main board graphics card from deformation and damage. The main body of the video card bracket is made of 0.8mm thick plate, which is firm and solid; If the display card is installed horizontally, the motherboard card slot and the display card will be deformed to some extent for a long time. It not only destroys the appearance of the graphics card, but also seriously affects the compatibility of the motherboard replacement graphics card. The vertical installation of the graphics card effectively changes the sagging physical deformation of the graphics card and the motherboard. Specification: Origin: Mainland China Model Number: Video Card Support Support Case Model: for ATX Model: VGPUKT4.0 Color: White Material: Metal + ABS Applicable video card types: Support vertical installation of all brands of video cards Applicable chassis type: 7 X PCI slot chassis (note that the entire PCI slot bracket must be removed before installation). It supports vertical installation of PCle4.0 graphics cards in all directions and downward compatibility Size: about 16.5x6.5x5.5cm/6.5x2.56x2.17in Wire length: 220mm/8.66in Weight: 470g
Note: 1 X Adapter Cable Kit                  
|
Enlace proporcionado por:
