Carcasa de disco duro externo M.2 NVMe, carcasa de disco duro externo de protocolo Dual USB3.1 tipo C con ventilador para SSD 2230/2242/2260/2280

M.2 NVMe External Hard Drive Enclosure Dual Protocol External Hard Drive Case USB3.1 Type-C with Fan for 2230/2242/2260/2280 SSD
Feature:
1. Hard Disk Case: M.2 SATA NVME to USB 3.1 hard disk housing. Comply with SATA 3 specifications and USB3.0 specifications.
2. Support: Dual protocol supports NGFF NVME protocol, suitable for M2 (M Key/B+M Key) SSDs, and supports M.2 SSDs, 22 * 30mm, 22 * 42mm, 22 * 60mm, and 22 * 80mm solid-state drives (SSD hard drives are not included)
3. Multifunctional: Optional with dual wire, USB-A, and USB-C interfaces. The output speed depends on the type of SSD you are using, NVME (10Gbps). Support UASP protocol.
4. Material: Aluminum alloy housing, with a colorful breathing cooling fan, efficient heat dissipation, easy to use, plug and play, no drive required.
5. Satisfaction Guarantee: We strive to provide each customer with the highest standard of customer service to ensure you have a pleasant shopping experience. If you have any issues, inquiries or need assistance, please feel free to contact us directly.

Specification:
Origin: Mainland China
Material: Aluminum alloy
Main controller: RTL9210B
Maximum support: 2TB
Interface: USB 3.1 Gen2
NVME read/write: 10Gbps
Sata read and write: 5Gbps
Fan speed: 7000 rpm
Noise: 30dB
Hard disk interface: M2 B&M Key, M Key
Applicable protocol: Dual protocol compatible with NVME PCI-E protocol and SATA NGFF protocol
Hard disk support: M.2 NGFF&NVME dual protocol, 2230/2242/2260/2280 and other four sizes of solid-state hard disk
Output connector: USB3.1Type-C
Installation method: Fixed with lock screws
Support systems: for Windows, for Linux, for Android, for MAC
Net weight of product: 66g
Gross weight of product: 121g
Product size: About 105.5x28x17.5mm/4.15x1.10x0.68inch
Package size: About 170x75x20mm/6.69x2.95x0.78inch
Matters needing attention:
Equipped with a USB3.1 high-performance chip, the transmission speed of the product's input terminal is 10Gbps, and the transmission speed of devices connected to the USB3.0 interface will be affected
This product uses standard USB 5V ± 5% power supply, exceeding the standard voltage range can cause product damage or safety hazards
When removing a hard disk, please perform a safe removal operation on the computer before disconnecting from the computer. Do not forcibly remove the hard disk case and hard disk to avoid causing data or disk errors, damage, or loss
Do not forcibly unplug the hard disk when copying data to avoid file loss or hard disk damage
Before operating the hard disk partition or formatting, please backup the hard disk data in advance. Our company is not responsible for recovering the data in the hard disk, nor is it responsible for any losses caused by the loss of hard disk data
Do not drop, squeeze, impact, or throw this product to avoid damaging it
Reminder:
1. Excluding M.2 SSDs.
2.For new unused SSDs, it is necessary to create a partition first, otherwise they cannot be identified.

Note:
Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!
Please allow 1-2cm measuring deviation due to manual measurement.

1 x Hard disk case
1 x USB A to C cable
1 x USB C to C cable
1 x Screwdriver