Cable adaptador de ventilador de ordenador USB a 4 pines, conector de Cable de alimentación de 5V, adaptador de ventilador de 3 pines o 4 pines a USB

[product name]: packet network USB to small 4Pin cable
[product length]: 30cm
[wire model]: 2464 # 22Awg
[insulation material]: PVC insulation
[conductor Specification]: 17 * 0.14ts
[conductor material]: pure copper
[outer diameter of wire]: od3 5mm
[rated temperature]: 80 ℃
[wire color]: Black
[product interface]: a small 4Pin connector on the main board at one end and a USB interface at the other end
[product function]: change the CPU fan of the chassis to USB interface for power use

Some friends want to power the chassis fan with the computer USB interface, please choose this cable. Or if you want to convert the chassis fan DIY into a laptop cooling pad fan, please use this line.

Note: if the chassis fan uses this USB adapter cable, the speed of the fan will change60% reduction
On the contrary, if the fan speed is fast, using this line can reduce the speed by 60%

Using this adapter cable, it is recommended to use a fan with higher speed

Introduction:
The cooling fan must be started at 5V low voltage, that is, the USB 5V power can still operate. In this case, the adapter cable can be used.Otherwise, even if there is no problem with the line, the fan will not turn. We must understand this meaning.
All the cooling fans in our shop are started at 5V, which can be used when connected to the USB interface of the computer. It is recommended to buy.