ADT-Link USB3.2 GEN2 Type-E To Type-E Extension Cable Internal USB 3.2 E Type Male To Female Cable w Screw Holes for Motherboard

Brand name: ADT-LINK

Product name: USB 3.2 Type-E male to female flat cable

Product model: UFF3.2-FM-20P series

Transfer speed: USB3.2 Standard 10Gbps high speed(20Gbps within 50cm ; 10Gbps within 1 meter)

Wire length: 3~300 cm, the length can be customized,

Current capacity: 3A within 50cm ; 1.5A within 1 meter

Product application: USB3.0/3.1/3.2 internal 20Pin USB type-E front panel socket extension flat cable

S=USB-A ; C=USB-C ; W=USB-B ; F=USB-E

Cable length Description:

The length of the wire refers to the part of the visible wire. It does not include the PCB and the connector. For the wire length, please refer to the 5cm blue arrow in the figure below.

Product Model description:

Product Name

Product Model

speed bandwidth

type-E to motherboard built-in 19/20pin female extension cable

UF9T-UF1A

Gen 1x1 5Gbps

type-E to motherboard built-in 20pin type-e female extension cable

UF9T-UF6A

Gen 1x2 10Gbps

Note:
What is the hole spacing size of UF9T?



Product real shot:

Summary of technical issues:

1. Can wires and PCB connectors be split?

No, in order to purify the signal transmission and avoid the accident of wire falling off, our wire and PCB connectors is soldering and protected by the heat shrinkable tube sleeve, so the product can not be separated.

2. Cable thickness? Can it be bent?

The thickness of the wire is 1.4mm, and it can be bent and folded without affecting the use.

3. Is there any EMI shielding for Cable?

No metal shield. The extender utilizes the latest materials for EMI shielding with five sole flat cables design. This technique allows each cable to be fully covered by electromagnetic interference shielding with conducting polymer to guard against incoming or outgoing emissions of electromagnetic frequencies, minimize disturbance and degradation on performance, and reduce the weight of the extender.